-
sE7 Factory Matched Small-diaphragm Condenser Microphone Pair
Inc. Sales TaxInc. Sales Tax$229.00Components Capsule: 1 / 2" Back-electret condenser capsule -
Audix F90 Small Diaphragm Clip Microphone
Inc. Sales TaxInc. Sales Tax$99.00Use the pre-polarized Audix F-90 Condenser Microphone designed with drums, percussion, and instruments in live sound and live broadcast applications. With a smooth uniform response over a frequency... -
Used Pair of AKG C451E Condenser Microphones
Inc. Sales TaxInc. Sales Tax$799.00Used pair of AKG C451E condenser microphones, listed as the pair shown in the photos. This used pair has been tested and both microphones are in good working order, with normal cosmetic wear from... -
-
AUDIX CX112B Large Diaphragm Microphone
Inc. Sales TaxInc. Sales Tax$299.00The CX112B is a large diaphragm condenser microphone with a contemporary design and superior performance characteristics. This mic is an exceptional tool for professional audio production, project...
Description
The sE7 is a high-quality small diaphragm condenser microphone intended for studio and live sound applications with a variety of instruments like drums to piano.
Features:
- 2 sE7 microphones
- 2 mic clips with thread adapters
- 2 wind screens
Specs:
Capsule Type: 1/2“ back-electret condenser capsule
Polar Pattern: Cardioid
Frequency range: 20 Hz - 20 kHz
Sensitivity: 19 mV/Pa (-34.5 dBV)
Max SPL: 136 / 156 dBSPL (0/20 dB Attenuation pad)
Equivalent noise level: 16 dB(A)
Dynamic range: 120 / 140 dB (0/20 dB Attenuation pad)
Signal to Noise Ratio: 78 dB
Low-cut filter: 80 Hz, 6 dB/Oct, switchable
Attenuation Pad: 20 dB, switchable
Powering: 48 Volts according to IEC 61938
Electrical Impedance: <200 Ohms
Recommended load impedance: >1k Ohms
Current consumption: 3.0 mA
Connectivity: 3-pin male XLR connector
Dimensions: Diameter: 23mm (0.91 in), Length 120mm (4.72 in)
Weight: 128 g (4.52 oz.)